Solenoid Valve
- Low power consumption, standard power 0.9 W, direct controlled by PLC
- Long service life, up to 50 million times, high reliability
- Terminal - horizontal and vertical insertion can switch freely
- The most compact design, valve body width 10mm
- Multiple uses: often use as the pilot valve, or control of the single mini acting cylinder, or integrate with the manifold to form valve group
Ordering Code
Description
Assembly & usage
Reviews
－ Textile
－ Industrial Automation
－ Electronics & Semiconductor
－ Medical Sector
Main components
1. Cover cap - Perspective type resin
2. PCB board - high stability design
3. Manual override - durable POM
4. Body - High Strength PBT
5. Spring - High Toughness Stainless Steel
6. Sealing ring - anti-deformation rubber
7. Iron Core Components - High Permeability Soft Magnetic Alloy
8. Coil - Enameled copper wire, 180 ° C ELEKTRISOLA, conforming to IEC 60317-51; the frame uses high heat resistance PPS
Hole location installation drawing
1. Valve body installation method
Use two M1.7X13 bolts and tighten them with a torque of 0.1 ~ 0.15N.m to fix the valve body.
2. Terminal wire insertion method
The vertical plug-in type and parallel plug-in type common terminal block can be inserted into the terminal wire according to the actual needs.
Note: There is no polarity difference between positive and negative terminals.
3. Other notes
Do not use the AC coil in series with other equipment