10mm Miniature Solenoid Valve
- Small size and convenient installation: The most compact design, valve body width 10mm,Which can be installed on a single base or assembled on a manifold
- Energy-saving and environmental protection: Standard 1W, energy-saving power 0.3W
- Large flow rate and Wide application: It has large flow rate, can be used for compact cylinder, swing cylinder and other slider series, also applies to the pilot control of the processing
- Fast response and multiple uses: within 10ms of response time, vacuum function can be easily realized
- Long service life, up to 50 million times, high reliability
Ordering Code
Description
Assembly & usage
Reviews
－ Textile
－ Industrial Automation
－ Electronics & Semiconductor
－ Medical Sector
Main components
1. Cover cap - Perspective type resin
2. PCB board - high stability design
3. Manual override - durable POM
4. Body - High Strength PBT
5. Spring - High Toughness Stainless Steel
6. Sealing ring - anti-deformation rubber
7. Iron Core Components - High Permeability Soft Magnetic Alloy
8. Coil - Enameled copper wire, 180 ° C ELEKTRISOLA, conforming to IEC 60317-51; the frame uses high heat resistance PPS
Hole location installation drawing
1. Valve body installation method
Use two M1.7X13 bolts and tighten them with a torque of 0.1 ~ 0.15N.m to fix the valve body.
2. Terminal wire insertion method
The vertical plug-in type and parallel plug-in type common terminal block can be inserted into the terminal wire according to the actual needs.
Note: There is no polarity difference between positive and negative terminals.
3. Other notes
Do not use the AC coil in series with other equipment
