Condensate Drain valves

Float Type Drain Valve

Round Float Type Drain Valve ,1/2BSP ,500L/H, 20Bar ,Gas Tank Air Drain Valve

Samples free,Factory price, 12 months warranty

Features

Extremely compact and easy to install in tight locations, automatic discharge
No power, no noise, no loss of compressed air
Corrosion resistance, long life
Equipped with manual drain button

Contact Now

Products

Angle Seat Valves

Condensate Drain valves

Pneumatic Solenoid Valve

Pneumatic Solenoid Valves - SY Series Pneumatic Solenoid Valves - 5V Series Pneumatic Solenoid Valves - 4V Series Miniature Solenoid Valves

Solenoid Valves

General Purpose Solenoid Valves High Pressure Solenoid Valves High Temperature Solenoid Valves

Contact Now

Name:

Email: Email is wrong!

Message: Message is wrong!

SUBMIT

Description

Specification

Installation & Usage

Reviews

Description

The float type automatic drain valve is a compressed air condensate automatic drain device, which belongs to continuous drip row.

The FCP20 compressed air condensate automatic Float type drain valve is different from the traditional mechanical automatic drain in that it is a continuous drip drain. The shell is made of aluminum alloy, the surface is spray-cured, and the inner and outer walls are resistant to corrosion. A stainless steel floating ball drainage system is installed inside.

This product has reliable operation, no noise, no electricity, no loss of compressed air, and is not easy to block. It is the best choice for compressed air blowdown valve.

The float type automatic drain valve is a compressed air condensate automatic drain device, which belongs to continuous drip row.

Applications

● Filters

● Separators

● Dryers

● Gas storage tanks

● Drip feet and other compressed air systems

Specifications

Model	FCP20
Max.displacement (L/Hour）	500
Port size	G1/2"
Working medium	water
Working Pressure	0~16bar
Max.Pressure	20bar
Body material	Aluminum

Installation Requirements

－ The actual use pressure and temperature cannot exceed the label.

－ Before installing the FCP20 drain, you should first remove the dirt, copper shavings, rust, etc. in the compressed air system. It is recommended to empty the system for 1 minute under full pressure before installing.

－ During installation, this automatic drain must be installed under the drainage device of the equipment, otherwise the condensate will be full and affect the drainage effect.

－ FCP20 drainage port can be used as a "free flow hole", or a drainage pipe can be installed.

Maintenance

Unscrew the manual drain button to allow the water and fluid in the drain to flow until the compressed air in the device enters the ball cylinder for several minutes, and then close the hand button. If the discharged water is more than 0.5 liters, it means that the automatic drain is blocked, and the drain must be thoroughly cleaned.

Disassemble the automatic drain at least once a year for internal fitting cleaning. When cleaning, you can use soapy water or detergent, do not use organic solvents, so as not to damage the rubber accessories

Share your thoughts Showing 6 of 0 reviews

Most recent

Top Reviews

Your rating

Your review *

Name *

Enter your Name

Email *

Enter your Email

Upload Image

Notice: Ensure your image is no larger than 200KB before uploading.

Submit